How Many Watts Does a Space Heater Use? Real Specs, Cost and Battery Run Time

how many watts does a space heater use - 3D illustration

Disclosure: As an Amazon Associate I earn from qualifying purchases. Figures come from manufacturer specifications and published listings; costs and run times are estimates, not test results. See our affiliate disclosure.

Quick answer: Most plug-in space heaters use 1,500 watts on high. The Lasko 754200, for example, is rated 1,500 W (12.7 A) on high and 900 W (7.0 A) on low.

Specifications used in this guide

ItemFigure
ModelLasko 754200 ceramic heater
High setting1,500 W, 12.7 A, 5,118 BTU/h
Low setting900 W, 7.0 A, 3,070 BTU/h
Voltage120 V household outlet
Energy per hour on high1.5 kWh
SourceLasko specification sheet

Why almost every space heater is 1,500 watts

A standard US household outlet supplies 120 volts on a 15 or 20 amp circuit. A 1,500 W heater draws about 12.5 amps (the Lasko 754200 sheet lists 12.7 A), which is close to the practical limit for a continuous load on a 15 amp circuit. That is why manufacturers cap plug-in heaters at about 1,500 W, and why a heater should not share a circuit with another big load such as a microwave or hair dryer.

Watts to BTU: how much heat you get

Electric resistance heaters turn almost all of their electricity into heat. One watt equals about 3.412 BTU per hour, so 1,500 W gives about 5,118 BTU/h, exactly the figure Lasko lists. On low, 900 W gives 3,070 BTU/h.

This also means the heater type does not change the heat per watt. A 1,500 W ceramic, oil-filled or infrared heater all produce about 5,100 BTU/h. They differ in how they deliver the heat: fans spread warm air quickly, oil-filled radiators heat slowly and stay warm, and infrared heaters warm the people and objects in front of them.

How a ceramic space heater works

A ceramic heater passes current through ceramic plates with metal wires embedded inside them. The plates heat up, and a small fan blows room air across them. The fan motor uses only a few watts; the element uses almost all of the rated power. A thermostat switches the element on and off to hold the temperature you set.

Space heater safety checklist

The U.S. Fire Administration advises plugging space heaters directly into a wall outlet, never into an extension cord or power strip. The National Fire Protection Association recommends keeping anything that can burn at least three feet away from a heater.

Choose a heater with tip-over and overheat shut-off, place it on a hard, level floor, and turn it off when you leave the room or go to sleep. If the plug or outlet feels hot, stop using it and have an electrician check the outlet.

Ways to lower the cost

Heat only the room you are in and keep the door closed. Use the thermostat or the low setting once the room is warm. Seal drafts around windows. A 900 W low setting costs about 40 percent less per hour than high.

Energy and cost table

Costs use about 18 cents per kWh, the EIA’s 2026 forecast for the average US residential price. Use your own rate from your electricity bill for an exact figure: kWh x price per kWh.

PeriodEnergyCost at $0.18/kWh
Per hour1.500 kWh$0.270
8 hours12.00 kWh$2.16

Power station run-time estimates

Estimates assume about 85% of rated capacity is usable after inverter losses, at 1500 W. Real results vary with temperature, settings and the station’s efficiency.

Power stationUsable energyEstimated run time
1,024Wh station870 Wh0.6 h
2,048Wh station (e.g. EcoFlow DELTA 2 Max)1,741 Wh1.2 h
3,600Wh station3,060 Wh2.0 h

Watts, amps, volts and kWh in plain English

Watts (W) measure how fast an appliance uses energy right now. Amps (A) measure the current it draws. Volts (V) are the pressure of the supply, about 120 V at a standard US outlet. The link between them is simple: watts = volts x amps. For motors, multiplying volts by amps gives volt-amps (VA), which is slightly higher than real watts because of power factor.

Kilowatt hours (kWh) measure energy over time, and they are what your utility bills you for: kWh = watts x hours / 1,000. A 1,000 W load running for one hour uses 1 kWh. A 50 W load needs 20 hours to use the same 1 kWh. Power stations are rated in watt hours (Wh) of storage and in watts of output; you need enough output watts to start and run the appliance, and enough watt hours to run it for as long as you need.

Sizing worksheet for a generator or power station

  1. Find the appliance’s running watts (or volts x amps) on its label or in its manual.
  2. Find its starting (surge) watts. Motors and compressors, such as pumps, freezers and refrigerators, can need two to three times their running power for a moment.
  3. Add the running watts of everything else you want to power at the same time.
  4. Choose a generator or power station whose continuous rating covers the running total and whose surge rating covers the largest starting load plus everything else, with about 20 percent margin.
  5. For a battery, divide its usable watt hours (about 85 percent of the rating) by the average watts to estimate run time.

How it compares with other home appliances

These are the figures from our other “how many watts” guides, all taken from manufacturer specifications:

Appliance (example model)PowerGuide
Space heater (Lasko 754200)1,500 W high, 900 W lowThis guide
CPAP (ResMed AirSense 11)About 56 W typical, 73 W peakHow many watts does a cpap use?
7 cu ft chest freezer (Frigidaire FFCS0762AW)About 26 W average (225 kWh/year)How many watts does a chest freezer use?
1/3 HP sump pump (Zoeller M53)About 1,115 VA running, ~2,980 VA startHow many watts does a sump pump use?
1,000 W microwave (Magic Chef MCM1110)1,500 W inputHow many watts does a microwave use?

Key takeaways

  • How many watts does a space heater use per hour? A 1,500 W heater uses 1.5 kWh in one hour on high; on a 900 W low setting it uses 0.9 kWh.
  • How many amps does a 1500 watt space heater draw? About 12.5 A at 120 V; the Lasko 754200 specification sheet lists 12.7 A.
  • How much does it cost to run a space heater for 8 hours? At about 18 cents per kWh, 8 hours on high uses 12 kWh and costs about $2.16. A thermostat cycling the heater lowers this.
  • Can a portable power station run a space heater? A station with at least 1,500 W of AC output can, but run time is short: about 1 hour 10 minutes on high from a 2048Wh unit.

How to measure your own appliance

Labels show maximum ratings. To see what your appliance really uses, plug it into a plug-in energy meter for a day or a week and read the kWh total. Divide kWh by the hours measured to get the average watts.

Power station used in our examples

Our run-time examples use the EcoFlow DELTA 2 Max: 2048Wh LFP battery, 2,400 W AC output, 4,800 W surge (per EcoFlow). Read our EcoFlow DELTA 2 Max review.

Check the current price on Amazon

Watch: explained in 3D

Frequently asked questions

How many watts does a space heater use per hour?

A 1,500 W heater uses 1.5 kWh in one hour on high; on a 900 W low setting it uses 0.9 kWh.

How many amps does a 1500 watt space heater draw?

About 12.5 A at 120 V; the Lasko 754200 specification sheet lists 12.7 A.

How much does it cost to run a space heater for 8 hours?

At about 18 cents per kWh, 8 hours on high uses 12 kWh and costs about $2.16. A thermostat cycling the heater lowers this.

Can a portable power station run a space heater?

A station with at least 1,500 W of AC output can, but run time is short: about 1 hour 10 minutes on high from a 2048Wh unit.

Can I plug a space heater into an extension cord?

No. The U.S. Fire Administration advises plugging space heaters directly into a wall outlet.

Related guides


Amazon affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Prices and availability change; check Amazon for current details.