Disclosure: As an Amazon Associate I earn from qualifying purchases. Figures come from manufacturer specifications and published listings; costs and run times are estimates, not test results. See our affiliate disclosure.
Quick answer: Starlink lists the Standard kit at 75-100 W average power use and the Starlink Mini at 25-40 W, so a Standard kit uses about 1.8-2.4 kWh per day.
Specifications used in this guide
| Item | Figure |
|---|---|
| Kit | Starlink Standard |
| Average power (Starlink spec) | 75-100 W |
| Power supply input | 100-240 V AC, 2.5 A, 50-60 Hz |
| Starlink Mini average power | 25-40 W |
| Flat High Performance (active) | 110-150 W |
| Energy per day (Standard) | About 1.8-2.4 kWh |
Why Starlink uses more power than a home router
A normal Wi-Fi router uses only a few watts. Starlink is different: the dish is a phased-array antenna that steers its beam electronically to track satellites moving across the sky, and it stays on around the clock. The router and its power supply add their own load. That is why Starlink lists the Standard kit at 75 to 100 W of average power, about the same as an old 100 W light bulb left on all day.
Power use is not perfectly steady. It rises when the dish works harder, for example in bad weather or when it warms itself to melt snow, and it falls when the link is quiet. The 75-100 W range is Starlink’s own average figure, so it is the best number to plan with.
Standard vs Mini vs Flat High Performance
Starlink’s spec pages list the compact Starlink Mini at 25 to 40 W average, less than half of the Standard kit. The Flat High Performance dish, designed for vehicles and boats, is listed at 110 to 150 W when active. If you mainly need internet on battery power, the kit you choose matters more than anything else.
For a cabin, RV or boat that relies on solar and batteries, the Mini’s lower draw can roughly double run time on the same battery. For a home backup plan, the Standard kit works well as long as your battery is sized for a full day of use.
How much electricity Starlink uses per day and per month
At 100 W, the Standard kit uses 2.4 kWh per day. At about 18 cents per kWh, the 2026 average US residential price forecast by the EIA, that is about 43 cents a day or roughly $13 per month. At 75 W it uses 1.8 kWh per day, about 32 cents, or roughly $10 per month.
Those costs are separate from your Starlink subscription. They depend on your own electricity rate, so check your bill and multiply kWh by your price per kWh.
Running Starlink on a power station
A portable power station converts its battery to 120 V AC through an inverter, which loses some energy; we assume about 85 percent of the rated capacity is usable. The EcoFlow DELTA 2 Max has 2,048 Wh and 2,400 W of AC output, far more output than Starlink needs. With about 1,740 usable Wh, it could run a Standard kit for roughly 17 hours at 100 W and about 23 hours at 75 W, and a Mini at 40 W for about 43 hours. These are estimates, not test results.
Remember to add the other devices you will use with it, such as a laptop, phone chargers and a light. A laptop charging at 60 W, for example, would cut the run time noticeably.
Tips to save battery with Starlink
Turn the kit off when you do not need a connection. Keep it out of shade so it does not work harder than necessary. In winter, use snow melt only when snow is actually building up. If you rely on batteries every day, consider the Mini or add solar panels to recharge your station during the day.
Energy and cost table
Costs use about 18 cents per kWh, the EIA’s 2026 forecast for the average US residential price. Use your own rate from your electricity bill for an exact figure: kWh x price per kWh.
| Period | Energy | Cost at $0.18/kWh |
|---|---|---|
| Per hour | 0.100 kWh | $0.018 |
| Per day (24 h) | 2.40 kWh | $0.43 |
Power station run-time estimates
Estimates assume about 85% of rated capacity is usable after inverter losses, at 100 W. Real results vary with temperature, settings and the station’s efficiency.
| Power station | Usable energy | Estimated run time |
|---|---|---|
| 1,024Wh station | 870 Wh | 8.7 h |
| 2,048Wh station (e.g. EcoFlow DELTA 2 Max) | 1,741 Wh | 17.4 h |
| 3,600Wh station | 3,060 Wh | 30.6 h |
Watts, amps, volts and kWh in plain English
Watts (W) measure how fast an appliance uses energy right now. Amps (A) measure the current it draws. Volts (V) are the pressure of the supply, about 120 V at a standard US outlet. The link between them is simple: watts = volts x amps. For motors, multiplying volts by amps gives volt-amps (VA), which is slightly higher than real watts because of power factor.
Kilowatt hours (kWh) measure energy over time, and they are what your utility bills you for: kWh = watts x hours / 1,000. A 1,000 W load running for one hour uses 1 kWh. A 50 W load needs 20 hours to use the same 1 kWh. Power stations are rated in watt hours (Wh) of storage and in watts of output; you need enough output watts to start and run the appliance, and enough watt hours to run it for as long as you need.
Sizing worksheet for a generator or power station
- Find the appliance’s running watts (or volts x amps) on its label or in its manual.
- Find its starting (surge) watts. Motors and compressors, such as pumps, freezers and refrigerators, can need two to three times their running power for a moment.
- Add the running watts of everything else you want to power at the same time.
- Choose a generator or power station whose continuous rating covers the running total and whose surge rating covers the largest starting load plus everything else, with about 20 percent margin.
- For a battery, divide its usable watt hours (about 85 percent of the rating) by the average watts to estimate run time.
How it compares with other home appliances
These are the figures from our other “how many watts” guides, all taken from manufacturer specifications:
| Appliance (example model) | Power | Guide |
|---|---|---|
| Starlink Standard kit | 75-100 W average | This guide |
| Queen electric blanket | 160-180 W max | Queen electric blanket guide |
| 18.3 cu ft refrigerator (Frigidaire FFTR1835VW) | About 47 W average (410 kWh/year) | 18.3 cu ft refrigerator guide |
| 50 pint dehumidifier (Frigidaire FFAD5033W1) | 545 W | 50 pint dehumidifier guide |
| 4 qt air fryer (Ninja AF101) | 1,550 W | 4 qt air fryer guide |
| Space heater (Lasko 754200) | 1,500 W high, 900 W low | Space heater guide |
| CPAP (ResMed AirSense 11) | About 56 W typical, 73 W peak | CPAP guide |
| 7 cu ft chest freezer | About 26 W average | 7 cu ft chest freezer guide |
| 1/3 HP sump pump (Zoeller M53) | About 1,115 VA running | 1/3 HP sump pump guide |
| 1,000 W microwave | 1,500 W input | 1,000 W microwave guide |
Key takeaways
- How many watts does Starlink use? Starlink lists the Standard kit at 75-100 W average and the Mini at 25-40 W.
- How many watts does Starlink use per day? About 1.8-2.4 kWh per day for the Standard kit.
- How much does it cost to run Starlink? About 32-43 cents per day, or roughly $10-13 per month, at 18 cents per kWh.
- How long can a power station run Starlink? A 2048Wh station could run a Standard kit for roughly 17-23 hours, or a Mini for about 43 hours (estimates).
How to measure your own appliance
Labels show maximum ratings. To see what your appliance really uses, plug it into a plug-in energy meter for a day or a week and read the kWh total. Divide kWh by the hours measured to get the average watts.
Power station used in our examples
Our run-time examples use the EcoFlow DELTA 2 Max: 2048Wh LFP battery, 2,400 W AC output, 4,800 W surge (per EcoFlow). Read our EcoFlow DELTA 2 Max review.
Check the current price on Amazon
Watch: explained in 3D
Frequently asked questions
How many watts does Starlink use?
Starlink lists the Standard kit at 75-100 W average and the Mini at 25-40 W.
How many watts does Starlink use per day?
About 1.8-2.4 kWh per day for the Standard kit.
How much does it cost to run Starlink?
About 32-43 cents per day, or roughly $10-13 per month, at 18 cents per kWh.
How long can a power station run Starlink?
A 2048Wh station could run a Standard kit for roughly 17-23 hours, or a Mini for about 43 hours (estimates).
Does Starlink use more power in snow?
Yes. When the dish warms itself to melt snow, power use rises above the normal average.
Related guides
- What size power station do you need for a refrigerator?
- What size generator do I need for my house?
- Solar generator vs gas generator
- EcoFlow DELTA 2 Max review
Amazon affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Prices and availability change; check Amazon for current details.
Mr. Jahangir Alam is an Electrical & Electronics Engineer with a wide range of experience in several fields of Engineering. He finds engineering articles to be very interesting, and that is why he likes to write them. To know more about him, please click here.
